HP DC5000 Option, Heading, Num Lock, Description

		Setup Utilities and Diagnostics Features
Heading	Option	Description
Advanced*	Device options	Allows you to set:
(continued)		Printer mode (bi-directional, EPP+ECP, output only).
		Num Lock state at power-on (off/on).
		S5 Wake on LAN (enable/disable).
		Processor cache (enable/disable).
		Hyper-Threading* (enable/disable).
		ACPI S3* support (enable/disable). S3 is an ACPI sleep state
		that some add-in hardware options may not support.
		✎ If the ACPI S3 support option is not presented, the other ACPI
		S3 options (ACPI S3 Video REPOST, AXPI S3 Hard Disk
		Reset, and ACPI S3 PS2 Mouse Wakeup) will not be
		available.
		ACPI S3 Video REPOST* (enable/disable). This feature reruns
		the video option ROM on a boot from the S3 state.
		ACPI S3 Hard Disk Reset* (enable/disable). Resets the hard
		disk on a boot from the S3 sleep state.
		ACPI S3 PS2 Mouse Wakeup* (enable/disable). Allows the
		mouse to wake the system from the S3 sleep state.
		Unique Sleep State Blink Patterns*. Allows you to choose an
		LED blink pattern that uniquely identifies each sleep state.
		Frame Buffer Size* Allows you to specify amount of system
		memory dedicated to the embedded graphics frame buffer. The
		AUTO setting attempts to optimize the frame buffer size
		depending on the amount of total system memory.
		Monitor Tracking (enable/disable). Allows ROM to save
		monitor asset information.
		Spread Spectrum* (enable/disable) allows system clocks to run
		with a spread spectrum.
		NIC PXE Option ROM Download (enable/disable). The BIOS
		contains an embedded NIC option ROM to allow the unit to
		boot through the network to a PXE server. This is typically used
		to download a corporate image to a hard drive. The NIC
		option ROM takes up memory space below 1MB commonly
		referred to as DOS Compatibility Hole (DCH) space. This
		space is limited. This F10 option will allow users to disable the
		downloading of this embedded NIC option ROM thus giving
		more DCH space for additional PCI cards which may need
		option ROM space. The default will be to have the NIC option
		ROM enabled.
	PCI VGA	Displayed only if there are multiple PCI video adapters in the
	Configuration	system. Allows you to specify which VGA controller will be the
		“boot” or primary VGA controller.

* Available on select models.

**These options should be used by advanced users only.

Service Reference Guide, dc5000 360201-002 2–11