NOTE: If a valid firmware or configuration file is uploaded to the interface card, an automatic reboot occurs once the file has been received. The interface card cannot be accessed from the Visual Manager UI during the time that the reboot is in process, which is approximately 30 seconds.
Trace settings configuration
This menu allows the configuration of Trace Settings (see Figure 34).
Figure 34 Trace settings configurations screen
To change the settings, use the
Table 6 Trace Settings
Setting | Description |
|
|
General Errors | Displays the most serious error and exception conditions |
|
|
FCP Transport | Fibre Channel Protocol transport functionality is monitored and recorded |
|
|
PS Transport | Parallel SCSI transport functionality is monitored and recorded |
|
|
PS Driver | Parallel SCSI driver functionality is monitored and recorded |
|
|
Timing | Timer functions are monitored and recorded |
|
|
AF | Active Fabric firmware is monitored and recorded |
|
|
Debugging capability for | |
|
|
SFP Diagnostics | Optical transceiver status is monitored and recorded |
|
|
FCP Driver | Fibre Channel Protocol driver functionality is monitored and recorded |
|
|
FCP Management | Fibre Channel Protocol management functionality is monitored and recorded |
|
|
PS Management | Parallel SCSI functionality is monitored and recorded |
|
|
SG List | Scatter/gather list is monitored and recorded |
|
|
FCP/RMI | Fibre Channel Protocol routing layer is monitored and recorded |
|
|