Special FC link control
When this option is selected from the System Utilities menu, the Special Fibre Channel Link Control menu is displayed.
Figure 73 Special FC Link states menu
Special FC Link Control
X.XX.XX XXXXXX XXXXXXXXXXXXXXXX
07/7/2005 15:05:45
Current FC Port 0:
Non Participating Mode = Off, LRC Bit in TL
Status Reg = Reset
1)Set FC Link to Non Participating Mode
2)Set FC LRC Mode Active ( bit=1 )
3)Set FC LRC Mode Inactive ( bit=0 )
4)Reset TL
5)Display TL Regs
X) Return to previous menu
Command, <enter> for next Port >
The settings provided on the Special FC Link states menu should only be used when directed to do so by an authorized technician for HP Systems.
SCSI command tracking
When this option is selected from the System Utilities menu, the SCSI Command Tracking menu is displayed.
Figure 74 SCSI Command Tracking menu
SCSI Command Tracking Menu
X.XX.XX XXXXXX XXXXXXXXXXXXXXXX
07/7/2005 15:05:45
1)Turn SCSI Command Tracking OFF
2)Display Available Hosts & Devices
3)Display Command Tracking Info
4)Clear ALL Command Tracking Info X) Return to previous menu
•Select 1 to toggle SCSI Command Tracking ON or OFF. When toggled ON, all SCSI commands received or transmitted to or from the interface card are logged. When OFF, these commands are not logged. When set to ON, menu options 2 through 4 are also available from this menu.
•Select 2 to display all selected hosts and devices.
•Select 3 to set the data to be displayed in terms of Type (Device, Host, ALL), Protocol (FC, SCSI, Other, ALL), and Specific (ID or ALL). If ID is selected for Specific, this ID can be an FC LUN, Switch ID (S_ID),
86 Using the Command Line Interface