Real-Time clock configuration

When this option is selected from the Perform Configuration menu, the System Clock Setup menu appears.

NOTE: The time is based on a 24-hour clock. There is no a.m. or p.m. designation. For example: 1:00 p.m. is 13 hours 00 minutes or 13:00.

Figure 61 System clock setup menu

-

System Clock Setup Menu

X.XX.XX XXXXXX XXXXXXXXXXXXXXXX

07/7/2005 08:56:22

TUESDAY, Date: 07/7/2005, Time: 08:56:22

1) Set clock

X) Return to previous menu

Select 1 to set the clock. A series of three prompts appear allowing the set up of 24 hour time (hh:mm:ss), current date (mm/dd/yyyy), and the day of week (SUN, MON, TUE, WED, THU, FRI, SAT). For time, it is not necessary to enter the seconds, that is, hh:mm is an acceptable format. For the date, the month and day can be entered as single digits, for instance 6 instead of 06.

Active fabric configuration

When this option is selected from the Perform Configuration menu from the Main menu, the Active Fabric menu appears.

NOTE: An Active Fabric Controller LUN is needed when using Library & Tape Tools to upgrade the interface card firmware, and to generate support tickets.

Figure 62 Active fabric configuration menu

Active Fabric Configuration Menu

X.XX.XX XXXXXX XXXXXXXXXXXXXXXX

07/7/2005 08:56:22

Current Active Fabric Configuration:

Server

Free Backup Mode

: DISABLED

Number

of

interface

card LUNS (0-4)

:

1

interface

card LUNS

in auto-assigned map go:

last

1)Change number of interface card LUNs

2)Change location of luns in auto-assigned map

X) Return to previous menu

78 Using the Command Line Interface