HP E1200-320 manual Entire device list

•Select 8 from the Device Mapping Main menu to display the entire device list. Because the entire device list may not fit on one screen, select N or P to go back and forth between screens displaying more maps. Select X to return to the Device Mapping Main menu.

Figure 55 Entire device list

Entire Device List

X.XX.XX

XXXXXX

XXXXXXXXXXXXXXXX

07/7/2005

08:56:22

+

----

++------

+

------+

------+------

+---------------------------------

+

---------

+

# Prtl Port TYPE STAT Protocol Specific Information

Rt Ct

+

----

++------

+

------+

------+------

+---------------------------------

+

---------

+

1

SCSI

1 TAPE

UP

Target=

3

Lun=

0

2

2

2

SCSI

2 TAPE DOWN Target=

5

Lun=

0

1

1

3

SCSI

5 TAPE

UP

Target=

1

Lun=

0

2

2

+

----

++------

+

------+

------+------

+---------------------------------

+

---------

+

Page # 1 out of 1 pages.

===>

Number of entries in the Device Table = 3

Enter(N=Next, P=Prev, X=Exit) >

•Select 9 from the Device Mapping menu to activate port mapping changes.

CAUTION: Before activating any port mapping changes, HP strongly recommends that the user verifies

there are not any command or data operations occurring in conjunction with devices affected by the mapping changes. For example, deleting a LUN or device from a map may disrupt I/O transfers with that device. It is the user’s responsibility to ensure that no operations are negatively impacted due to the activation of mapping changes.

NOTE: All current mapping settings take effect immediately. If another management interface has made unsaved mapping changes, those changes are lost. Current mapping settings are also not visible in other interfaces until the interface card is rebooted.

NOTE: If the Activate Port Mapping Changes option is not selected, the mapping changes do not take effect until the interface card is rebooted.

74 Using the Command Line Interface