HP RISS Components manual Scheduling an event, Enabling load balancing message by message

Scheduling an event

To schedule an event:

1.Start Scheduler.

2.Select New to display the New Event dialog box.

3.After the New Scheduled Event window opens, enter a descriptive name for the event. The name should not contain any special characters.

Figure 35 Scheduling an event

4.To select an event type, click the down arrow to see the types that are supported. Select an event type and click OK.

Figure 36 Types of events

A window appears indicating that a companion rule for this event has been created in the Mail Attender for Exchange database. This rule must be edited using the Mail Attender for Exchange console interface, in order to add the information stores that should be included in processing the scheduled event.

Enabling load balancing message by message

Anon-sticky port (port 81) is provided to allow load balancing of hash lookups on a message-by-message basis for client applications.

To make an email miner use the non-sticky port:

1.Start the EMS Scheduler application.

2.Find a mailbox mining event.

3.Find the DocRef Host setting. This should contain the IP address/Host name of a VIP.

4.Add the port number by appending a colon followed by the port number to the IP address/Host name. For example:

DocRef Host: HTTPHOST: 81

Administrator Guide 123