5.Click Apply.

6.Close the EMS Scheduler application.

7.Restart the Launch Manager service to make the new setting take effect. Repeat this procedure as needed for all mailbox mining events.

Enabling a scheduled event

After a new event has been created, it must be edited to enable it and set other parameters.

In the Schedule Events Maintenance window, click Edit. The edit window that appears is specific to the selected event type.

Each edit window is examined in the sections that follow.

Figure 37 Enabling a scheduled event

Editing selective archiving events

The Selective Archiving Events window has a variety of configurable options:

Enabled check box: Use to enable or disable an event. The default value is Disabled.

SMTP Address: Select the SMTP Address check box and enter the RISS Virtual IP (VIP) used for SMTP. The VIP is the internal RISS domain that stores documents and is the same value as the ipToDomainInfo attribute used in Domain.jcml.

Recipient Address: Select the Recipient Address check box and enter <user>@<riss- domain.com>. Replace <riss-domain.com> with the name of the RISS domain that should store the Exchange server email. The domain name must correspond exactly to the name specified in Domain.jcml for this system. Note that more than one recipient can be specified, by separating the addresses with commas.

RISS Domain Name: Select the RISS Domain check box and enter the name of the internal RISS domain to which the email from this journal mailbox should be stored. The Domain Name must match exactly the domain name attribute specified in Domain.jcml.

RISS Domain ID: Select the RISS Domain ID check box and enter the domain ID that matches the domain name specified above. The Domain ID must match exactly the domain ID attribute in

Domain.jcml.

124 Configuring Outlook

Page 124
Image 124
HP RISS Components manual Enabling a scheduled event, Editing selective archiving events, Domain.jcml