3.Check the Status Area to see results of the cloning operation.

A check icon indicates the cloning operation is proceeding normally.

An X icon appears if the cloning operation has failed.

Reprocessing

The Reprocessing view displays each domain and shows whether reprocessing is enabled, when reprocessing is scheduled, and a history log report. Reprocessing is an engine service that scans recently stored data and reallocates messages to the proper repository.

Most reprocessing occurs as an automated and transparent background process that does not require any operational effort other than passive monitoring.

In most cases, messages are reprocessed to reapply routing rules that have been recently added and are applied to a short time period before the change has occurred. The Reprocessing view allows you to schedule and enable reprocessing based on new routing rules.

NOTE:

When you make a change using the Reprocessing Utility, the change does not take place immediately. It is put in the job queue, and the reprocessing itself occurs 24 hours later.

Table 39 Link to Reprocessing view

Origin

Link

 

 

left menu

Data Management > Reprocessing

 

 

Rescheduling all reprocessing schedules

To reschedule all the domains to the same reprocessing schedule:

1.In the Reprocessing view, click Reschedule All.

2.Complete the form to set the status and schedule.

3.Click Reschedule All.

4.To ensure that all schedules are enabled, verify that all Reprocessing Status check boxes are selected. If selected, the text Enabled appears next to the check box.

Editing reprocessing schedules

To edit a domain’s reprocessing schedule:

1.In the Reprocessing view, click the edit link next to the domain you want to edit.

Figure 13 Editing reprocessing schedules

2.Complete the form to set the status and schedule.

3.Click Save Schedule.

66 Data management

Page 66
Image 66
HP RISS Components manual Reprocessing, Rescheduling all reprocessing schedules, Editing reprocessing schedules