HP RISS Components manual Journal Mining Event window

Figure 39 Journal Mining Event window

•Enabled check box: Use to enable or disable an event. The default value is Disabled.

•Number of Processes: Use to change the number of processes for each event from the default value of 1.

•Frequency: Use the two Frequency check boxes to change the time interval between events from the default value of 2 minutes to any multiple of minutes, hours, or days.

•SMTP Address: Select the SMTP Address check box and enter the RISS Virtual IP (VIP) used for SMTP. The VIP is the internal RISS domain that stores documents and is the same value as the ipToDomainInfo attribute used in Domain.jcml.

•Recipient Address: Select the Recipient Address check box and enter <user>@<riss- domain.com>. Replace <riss-domain.com> with the RISS domain name that should store the Exchange server email. The domain name must correspond exactly to the name specified in Domain.jcml for this system. Note that more than one recipient can be specified, by separating the addresses with commas.

•RISS Domain Name: Select the RISS Domain check box and enter the name of the internal RISS domain to which the email from this journal mailbox should be stored. The Domain Name must match exactly the domain name attribute specified in Domain.jcml.

•RISS Domain ID: Select the RISS Domain ID check box and enter the domain ID that matches the domain name specified above. The Domain ID must match exactly the domain ID attribute in

Domain.jcml.

•Server: Select the Server check box and enter the name of the Exchange server for which journal mining is being configured. This server name must be resolvable by DNS in the RISS.

•Mailbox: Select the Mailbox check box and enter the journal mailbox to be used.

•Use TNEF: Select the Use TNEF check box if you want to change the Use TNEF default value from No to Yes. If Yes is selected, messages will be sent to the RISS in TNEF format.

Administrator Guide 127