HP RISS Components manual Configuring the asp.config file, Mbarney=http//mbarney Papoon=http//papoon

Table 62 Mail Attender rule to delete temporary items in Drafts folder

General	RissDeleteDrafts
Information Stores	<User define>
Folders	\Drafts
	Include subfolders
Conditions	Test Message Keywords
	Keywords= [MESSAGE_MAPICUSTPROP("PTOWASTA-
	TUS",C6448195FCA8CB4BB3E31303AA83C02C)]
	Test=”Equals”
	Value=”PTOWATEMP”
Actions	Report <User define>
	Delete Message
	Deletion Type=”Hard Delete”
	Other action settings: Click the Modify buttons and select the following
	check boxes.
	• Do not warn the user before performing the action
	• Apply this action to each item only once per rule execution
Schedule	<User define>
	Enable the rule

Configuring the asp.config file

The asp.config file has several OWA configuration settings.

RISS servers

A typical system can have one or more RISS products. The RISS section of asp.config contains a list of RISS servers. The syntax for an entry is a keyname followed by the protocol and server name. The keyname identifies the server. If there is a special template in the next section, the keyname must be the same for the server and its corresponding template. The keyname also shows up in the error page

if a document fails to load.

The syntax is: Symbol=<protocol>://<Server> where <protocol> can be http or https. For example:

[RISS]

mbarney=http://mbarney

papoon=http://papoon

RISS URL templates

The Template section contains custom RISS URL templates. For standard RISS products, the only setting in this section is the default setting.

If a custom template is defined, the template keyname must be the same as the corresponding RISS server keyname.

IMPORTANT:

Do not add a custom template unless instructed to do so by your HP service representative.

142 Configuring Outlook