You’ll find all the technical data on electric connection, on the machine identification label Fig. 1.

Machines provided with gas heating have a standard connection kit to carry out the following connections with:

-direct stiff pipe;-copper and double cone pipe;-rubber support.

Gas connections must be made in compliance with the safety regulations in force in the relative country.

4. USE

The machine have been designed, manufactured and protected to be used to make express coffee and hot beverages (tea, cappuccino, etc.). Any other use is to be considered unsuitable and therefore dangerous.

The manufacturer cannot be held responsible for any damage caused to people or things due to unsuitable, erroneous or irrational use of the machine.

The operator must always follow the indications contained in this manual. In the case of a failure or if the machine is not working properly, switch it off and do not attempt any direct repair. COntact the service centre.

The user must not:
●touch the hot surfaces and dispensing areas;●place liquid containers on the machine;●put his hands under the spouts during use;

●transport the machine or carry out maintenance operations when the plug is connected or when the machine is hot;

●wash the machine with water or steam jet;●completely or partially immersethe machine in water;●leave the machine exposed to heat sources;●use the machine if the cable is damaged;●touch the machine when his hands or feet are wet or damp;●use the machine when there are children in its proximity;●allow the machine to be used by children or unfit people;●obstruct the suction or dispersal grills with cloth or any other thing;●leave the side doors open (mod. S24);●do not use the machine when wet or very damp.
4.1. Precautionary measures

This machine may only be used with foodstuffs. It cannot be used for heating liquids or grinding any other kind of product that could damage and pollute it.

The manufacturer cannot be held responsible for damage to people or things caused by unsuitable, erroneous or irrational use.

5. TRANSPORT

5.1. Packaging
The machine is delivered in a strong cardboard box with internal protection.

The packaging bears symbols which must be observed during handling and stocking of the item.

Always keep the package in a vertical position during transport. Do not turn it over or lay it on its side and avoid bumping and exposure to atmospheric agents.

5.2. Inspection on receipt

Check that the machine received corresponds to the one indicated on the delivery note, including any accessories.

Check that it has not been damaged during transport and, if so, inform the forwarder and our customer service office immediately.

The packing elements (plastic bags, polystyrene foam, nails, cardboard, etc.) must not be left within reach of children as they are potential sources of danger. Do not dispose of the packing elements in the environment; consign them to firms authorized for their disposal.

79