MaxLoader User’s Guide
Target Device: Erased or blank INTEL 27C256
1.Make sure the MaxLoader is displayed without any communication error (refer to programming section ).
2.Place the AMD 27C256 device into the ZIF socket.
3.Select the manufacturer and part names from the Select menu.
4.Click on the Read button. In order to make sure the device is read properly, Click on the Verify button.
5.Remove the current chip from the socket and replace it with the erased or blank Intel 27C256 device. Select the appropriate device from Select menu on screen.
NOTE: You do not need to change the device information if you use the exact same chip as the source device.
6.Click on the Blank button.
7.Click on the Program button. The part will be programmed and verified automatically. If no error messages appear during the Programming or Verification process, your duplicating work is done successfully. You have a duplicated Intel 27C256 part from AMD 27C256 chip.
6.MAXLOADER OPERATIONS
This section describes the operation of the software. The Main standard
Basic Menu Screen Information
Option Information
•Gang Size : Current socket size when MaxLoader is used
• | Split | : Current world format for split programming |
•Enc Mode : Enable or Disable Encryption mode for Microcontrollers
•Base Port : Current parallel port address
•
35
