MaxLoader User’s Guide

After inserting a memory device into the ZIF socket, select the memory type from the device select “GENERIC RAM” selection screen and click on the RAM test button, in the test menu.

The program will test each address of the memory. A "Defective memory" message will be displayed with a current address if the memory has a defective bit. "Good memory" will appear when the test has passed successfully.

Test / Vector Test

Verifies that the PLD (PAL, GAL EPLD, etc.) currently behaves without having to prototype a circuit. In order to perform test vectors, test vectors should be in the JEDEC file when the file is loaded. Most PLD development software will generate valid test vectors automatically. Test vectors may be examined and modified with Vector Pattern Edit/^F6 command in the buffer menu screen.

76

Page 76
Image 76
IBM MaxLoader manual Test / Vector Test