10.If desired, write identifying information on one of the user labels that come with the blade server; then, place the label on the BladeCenter bezel just below the blade server, as shown in the following illustration.
User |
label |
Important: Do not place the label on the blade server or in any way block the ventilation holes on the blade server.
11. If you have other blade servers to install, do so now.
Important: Reinstalling a blade server into a different bay than the one from which it was removed could have unintended consequences. Some configuration information and update options are established according to bay number. You might need to reconfigure the blade server.
If this is the initial installation for a blade server in the BladeCenter unit, you need to configure the blade server with the blade server Configuration/Setup Utility program and install the blade server operating system. See the documentation that comes with the blade server for instructions.
44BladeCenter E Type 8677 and 1881: Hardware Maintenance Manual and Troubleshooting Guide
