IBM Type 8677, Type 1881 manual Optical or diskette drive

Lift points

Tabs

Pressure points

Slots

Reverse these instructions to reinstall the media tray cover. Press the rear of the cover down onto the two fasteners to secure the cover in place.

Optical or diskette drive

Note: The diskette drive is not present in all BladeCenter unit models.

The optical drive and the diskette drive have the same securing mechanism, a wire-retention spring. On the optical drive, the wire spring is on the left; on the diskette drive, the wire spring is on the right.

Complete the following steps to replace the optical drive or the diskette drive.

Note:

vRead “Installation guidelines” on page 31.

vRead the safety notices at “Safety information” on page 87.

vRead “Handling electrostatic discharge-sensitive devices” on page 90.

1.Remove the media tray (see “Media tray” on page 48).

2.Remove the media-tray cover (see “Removing the media-tray cover” on page 48).

CD-ROM drive Diskette drive

Drive guide

Wire spring

Retention hook

Drive guide

Drive guide

Wire spring

Retention hook

Drive guide

Chapter 5. Service replaceable units 49