Minimum Required Connections
The connections shown are the minimum required to operate the MDrivePlus Microstepping. These are illustrated in both Sinking and Sourcing Configurations. Please reference the Pin Configuration diagram and Specification Tables for the MDrivePlus Microstepping connector option you are using.
+VDC Motor Supply
+
DO NOT use the +5VDC Output P1:7 (Wire Crimp)
!or P2:6 (Flying Lead) for Optocoupler Supply. This voltage output is design to power the IMS USB to SPI converter cable ONLY!
P3:1 - Wire Crimp, Red Flying Lead
P3:2 - Wire Crimp, Black Flying Lead
Control Device
Step Clock |
|
|
|
|
|
|
|
| P1:4 - Wire Crimp, Orange Flying | Lead | ||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
| |||||
Direction |
|
|
|
|
| |||||||
|
|
|
|
| P1:6 - Wire Crimp, Blue Flying Lead |
| ||||||
GND |
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| P1:3 - Wire Crimp, White Flying Lead | |||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+MDrive34Plus Microstepping
+5 to +24 Opto Supply
Figure 2.3.8 Minimum Required Connections
MDrive 34Plus Microstepping Hardware - Revision R071108 | |
| Relevant to Firmware Version 3.0.02 |