JL Audio MCS-3800 manual To Assign a Fader or a Touch Sensor

To Assign a Fader or a Touch Sensor

Since the faders and touch sensors are Bank-switchable, select the desired Bank before entering Assign mode.

In other words, if assigning the first fader, the Bank switch will determine if the first fader is channel 1, or 9, or 17, or 25.

Press Assign to enter Assign mode. The yellow LED is lit. After entering Assign mode,

Touching a fader selects the touch sensor only. You are now able to assign the command sent when the fader is touched.

Moving the same fader selects the fader itself. You are now able to assign the command sent when the fader is moved.

At that point, the display “holds” the currently selected control.

If you change your mind and wish to edit a different control instead, press Assign to exit assign mode. Press Assign again to re-enter Assign mode and select a different control.

Use the LCD and rotary encoder knobs to edit the control. Turn the right-most encoder knob to reveal additional editable parameters.

After making the edit, press Enter on the Keypad to store the changes to memory.

33