More About Sending Locate Commands
At each keypad number press, the locate name and locate time automatically are updated.
That is, press 1, the display shows Loc 01 "Locate 01" Press 3, the display show Loc 13 "Locate 13".
When Enter is pressed on Keypad, the following happens:
(1)The locate time in LCD is sent via MMC (and 9 Pin)
(2)The locate time is shown in the
(3)If time code is being received, the locate time is held momentarily before the display is released to display either tally or current time code.
(4)The locate number field is reset. Pressing another numbered key on the keypad causes the number to appear in the LCD with a leading zero.
For example, if you press 3, 7, 2, Enter, and 3, the display shows LOC:03, LOC:37, LOC:72 (Enter), LOC:03
When time code is not being received, the 7 segment display holds the last time displayed, whether it is the result of incoming time code, incoming tally, or a sent locate time.
Locating by Direct Address
To send a Locate by specifying a time code, press Locate and enter the time. Press Enter to validate the entry.
Last function
Press Last to
The Last key instantly (that is, without pressing Enter) does the following:
(1)The locate time in LCD is sent via MMC (and 9 Pin).
(2)Locate time is shown in
(3)If time code is being received, the locate time is held momentarily before the display is released to display either tally or current time code.
64
