Quick Operation Reference
LCD Displays Encoder Names or Bank Name
If a Page button is lit, the LCD shows the names of the five "Virtual Encoders". If these names have not edited, they are "VKNOB1, VKNOB2, VKNOB3, VKNOB4, VKNOB5."
If no Page button is lit, the LCD show the Bank Name.
Bank Switchable Controls
The faders, their touch sensors, the encoders, and the buttons above the faders, are all Bank switchable.
Shiftable Controls
The F, M, W, Cursor, and Transport Buttons can have an alternate Shifted assignment.
Encoder Selection
For each channel, there are 8 Pages of 5 encoders. Prior to turning an encoder knob,
Press 1 of the 4 Bank switches to select the Bank.
Press 1 of the 8 Select buttons at the top of a fader channel. Press 1 of the 8 Page buttons above the LCD.
You have the equivalent of over 1200 independantly programmable rotary encoders.
To Assign A Control
1.Press Assign to enter Assign mode. The yellow LED is lit.
2.Select a control for editing.
At that point, the display “holds” the currently selected control. If you change your mind and wish to edit a different control instead, press Assign to exit assign mode. Press Assign again to
3.Use the LCD and rotary encoder knobs to edit the control. Turn the
4.After making the edit, press Enter on the Keypad to store the changes to memory. Either select another control, or press
Assign to exit Assign Mode.
91
