JL Audio MCS-3800 manual To Assign Mute, Solo, Aux and Select Buttons

To Assign Mute, Solo, Aux and Select Buttons

Since the Mute, Solo, Aux, and Select buttons are Bank- switchable, select the desired Bank before entering Assign mode.

Keep in mind that the Select buttons have two functions.

(1)They are used to select a set of 40 virtual encoders associated with each channel. (2) For maximum user-flexibility, they may also be programmed to send a command. If you wish to reserve the Select buttons to only select Encoders, and not to send a command, they may be assigned to send no command.

Press Assign to enter Assign mode. The yellow LED is lit.

After entering Assign mode, press a button to select it.

At that point, the display “holds” the currently selected control. If you change your mind and wish to edit a different control instead, press Assign to exit assign mode. Press Assign again to re-enter Assign mode and select a different control.

Use the LCD and rotary encoder knobs to edit the control. Turn the right-most encoder knob to reveal additional editable parameters.

After making the edit, press Enter on the Keypad to store the changes to memory.

38