Tripod Mounting
This unit can be mounted on a tripod (or monopod). This is
useful for preventing camera shake.
.
0To prevent this unit from falling off, check the tripod
mounting screw holes and positioning holes on the unit
carefully before mounting, and turn the screws until they
are fastened firmly.
Caution :
0To prevent injuries or damages which may result if this unit
falls off, read the instruction manual of the tripod (or
monopod) to be used and make sure that it is securely
attached.
Memo :
0It is recommended to use a tripod or monopod when
recording in conditions prone to camera shake (such as in
dark places or when zoomed to the telephoto end).
0Set the digital image stabilizer to Z (OFF) when using a
tripod for recording.
“Reducing Camera Shake” (A p. 46)
Attaching Headphones
You can attach optional headphones to this unit.
1Open the cover of the headphones connector.
.
2Connect the headphones to the headphones
connector.
.
Memo :
0The volume level of the headphones can be adjusted
using HEADPHONE VOL. ADJ. in the menu.
“ HEADPHONE VOL. ADJ. ” (A p. 97)
Getting Started
17