Adjusting Parallax During
Recording
When recording 3D images, parallax is automatically
adjusted. If the left and right images of an object close to the
camera do not appear to be in alignment, or the 3D effect of
a distant object is weak, you can make adjustments by
bringing the left and right images closer to each other.
0Parallax can be adjusted when 3D or LR MIX images are
displayed on the unit’s LCD monitor.
“3D VIDEO REC FORMAT (3D mode only)” (A p. 92)
1Tap k.
.
2Tap “MANUAL”.
.
MANUAL
AUTO
0The parallax adjustment screen appears.
0To set parallax adjustment to auto (default), tap
“AUTO”.
3Adjust the parallax.
.
SET
0To increase the amount of correction, tap “+”. Doing
so increases the value of the parallax display.
0To reduce the amount of correction, tap “-”. Doing so
decreases the value of the parallax display.
4Tap “SET” to confirm.
.
SET
Caution :
0Too much parallax may cause the 3D effect to be lost.
0If you see double images even after parallax adjustment,
set the display on the LCD monitor to 2D immediately.
Memo :
0While this unit is equipped with the function to adjust
parallax automatically, it may not work properly for the
following subjects.
- Subjects beyond the recommended shooting distance
(especially subjects that are extremely close to the
camera)
- Numerous subjects of the similar shape arrayed in a line,
such as the windows of a building
- Straight subjects such as electric wires
In these cases, adjust the parallax manually.
0When the power of this unit is turned off or the mode is
switched to playback after parallax is manually adjusted,
the “PARALLAX ADJUSTMENT” setting returns to
“AUTO”.
Recording
32