KEYS AND CONTROLS

FRONT PANEL OVERVIEW

There are 12 keys on the front panel. These keys are denoted as follows: L1 ~ L3 are the 3 keys to the left of the display (from top to bottom); F1 ~ F6 are the 6 keys below the display (from left to right); the top most key to the right of the display is the Power switch; R1 ~ R2 are the two keys below the Power switch, to the right of the display (from top to bottom).

MOBILE CONTROLLER RC-2000

qL1 ~ L3 key

Press to activate or select the function shown on the display to the right of each key.

wTuning / MULTI/CH / RIT/SUB control

Normally, it is used to adjust the frequency. Press this control to change the control mode. The current tuning control mode status appears on the top right of the display where “TUN” is Tuning control, “MLTI” is MULTI/ CH control, and “RIT” is RIT/ SUB control.

8