GROUP B–1

PRE

Press to switch the receiver preamplifier ON or OFF {TS-2000 page 57}. “PRE” appears on the display when this function is ON. “P/A” appears on the display when both “PRE” and “ATT” are ON.

ATT

Press to switch the receiver attenuator ON or OFF. “ATT” appears on the display when this function is ON. “P/A” appears on the display when both “PRE” and “ATT” are ON.

ANT1/ ANT2/ ANT

When operating on the HF ~ 50 MHz band, “ANT1” or “ANT2” appears. “ANT” appears when operating on the 144 MHz ~ 1.2 GHz bands. Press to select another antenna when operating on the HF ~ 50 MHz band.

P.C.T.

Press to switch the P.C.T. (Packet Cluster Tune) function ON or OFF {page 37, TS-2000 page 53}.

SATL

Press to switch the Satellite mode ON or OFF {page 31, TS-2000 page 53}.

GROUP B–2

REC

Press to enter stand-by mode for message recording {TS-2000 pages 43, 89}. To start recording a message, press [CH1], [CH2], or [CH3].

CH1

Press to play back the message which has been recorded in channel 1. When [REC] is pressed and the transceiver is standing by for recording, press this key to start recording in CH1.

CH2

Press to play back the message which has been recorded in channel 2. When [REC] is pressed and the transceiver is standing by for recording, press this key to start recording in CH2.

CH3

Press to play back the message which has been recorded in channel 3. When [REC] is pressed and the transceiver is standing by for recording, press this key to start recording in CH3.

19