1Confirm that the following conditions have been satisfied:
•The transceiver is in the receive mode.
•Scan is not being used.
•The Microphone Control is OFF.
2Configure the transceiver as you like.
•For the items that can be stored, see page 41.
3Press [PM], [P.IN].
•PM channel numbers 1 to 5 appear and blink at the bottom of the display.
4Press [1] to [5] corresponding to your desired PM channel.
•The settings listed on page 41 are stored in the PM channel.
•Press [OFF] to cancel.
1Press [PM].
•PM channel numbers 1 to 5 appear at the bottom of the display.
2Press [1] to [5] corresponding to your desired PM channel.
•The contents of the selected PM channel are recalled.
•The recalled PM channel number appears in the upper right corner.
•To exit PM Recall mode, press [PM], then press [OFF].
Note: You cannot recall a PM channel while transmitting.
AUTO PM CHANNEL SAVEAfter you recalled a PM channel, the function automatically overwrites the current PM channel with the present operating environment when:
•You recall another PM channel.
•You press [OFF] in PM channel recall mode.
•You switch the transceiver OFF.
Note: You cannot switch this function OFF.
43