GROUP A-3

MENU

Press to enter the Menu mode. Menu mode is used to activate and configure the various functions of the TS-2000(X)/ TS-B2000 {TS-2000 page 21}. Press [ADD] to add the current Menu No. to the Quick Menu. “” appears on the display when the Menu No. is added to the Quick Menu. Press [MNU SEL] to activate the Quick Menu function.

STEP

Press to change the frequency step size used for the MULTI/ CH control {TS-2000 page 37}. Select the desired step size using the [c]/ [d] keys or by turning MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to accept the new setting.

NB

Press to switch the Noise Blanker function ON or OFF. When it is ON, “NB” appears on the display. Press and hold to change the Noise Blanker Level. Select the desired level using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to accept the new setting.

AGC

Press to switch the AGC function ON or OFF. When it is ON, “AGC” appears on the display. Press and hold to change the AGC Level {TS-2000 page 38}. Select the desired time constant using the [b]/ [a] keys or by turning the MULTI/ CH control, then press either [EXIT]

or the MULTI/ CH control to accept the new setting.

PF

Press to activate the PF (Programmable Function) key assignment. The default assignment is VOICE1 {TS-2000 page 77}.

GROUP A–4

CLR

Press to exit from, abort, or reset various functions. Also used for erasing memory channels {TS-2000 page 62} or locking memory channels out of the scan list {TS-2000 page 62}.

M>V

Press to transfer data from a memory channel to a VFO {TS-2000 page 61}.

MG SEL

Press to enter Memory Group Select mode {TS-2000 page 64}. The selected group numbers are highlighted. You can select your desired group numbers using the [b]/ [a] keys, or by turning or pressing the MULTI/ CH control, then press [SEL] to toggle the selection. You can also press [ALL] to unselect all the group numbers. Press [OK] to save the setting or [CLR] to cancel the selection.

16