M.IN
Press to enter the Memory Scroll mode {TS-2000 page 60}. “MSR” appears on the display. Turn the MULTI/ CH control to select your desired memory channel number. Press [M.IN] to write the data to memory. You can also press [MN.IN] to enter and select the Memory Name and Memory Group. Select your desired character using the MULTI/ CH control, or the [b]/ [a] and [DEL] keys. Press [OK] to store the Memory Name. Press [G-SEL]to enter the Memory Group selection. Select a desired Memory Group using the MULTI/ CH control or [b]/ [a] keys, then press [SEL]. Press [OK] to store the new Memory Group selection.
V/M
Press to select either VFO or Memory Recall mode {TS-2000 page 59}. In Memory Recall mode, “tM” or “Ms” appears on the display. Turn the MULTI/ CH control to select your desired memory channel.
GROUP A–5A–5 functions appear only when recalling Memory Channels 290 ~ 299 {TS-2000 page 62}.
SET
Turn the Tuning control and press [SET] to set the frequency point of Program Scan Partially Slowed on the main transceiver {TS-2000 page 67}. The “
” icon appears on the display when you tune to the marked frequency. Press and hold the key to clear all the frequency points that you have configured.
OPEN
Press to confirm the start frequency when you recall a memory channel from 290 ~ 299 {TS-2000 page 62}.
CLOSE
Press to confirm the end frequency when you recall a memory channel from 290 ~ 299 {TS-2000 page 62}.
