3Press [V/M] to return to the frequency adjustment mode. If necessary, press the Tuning control to toggle between the Tuning and MULTI/ CH control.

SATELLITE CHANNEL NAME

You can name each Satellite Memory channel using a maximum of 8 alpha-numeric characters. First, store the settings to the Satellite Memory channel {above}.

1Press [M.IN] while in group A–4, then turn the MULTI/ CH control to select your desired Satellite Memory channel.

2Press [MN.IN].

• An entry cursor appears.

3Select a character by turning the MULTI/ CH control, then move the cursor using [[]/ [a]. Press [M.SR] to go back to Memory Scroll mode. Press [DEL] to erase the character at the cursor. You can also use the optional MC-52DM microphone to enter a name {TS-2000 page 63}.

4Press [OK] to store the name to the Satellite Memory channel. Press [CLR] to quit.

5The stored Satellite Memory name appears above the main band frequency display on the RC-2000.

QUICK MEMORY IN SATELLITE MODE

While in the Satellite mode, only 1 Quick Memory channel is available. It uses Satellite Memory channel 9 to store the settings. To store the settings to the Quick

Memory in Satellite mode, press [Q.IN] (L2). The settings are stored to Satellite Memory channel 9.

To recall the Quick Memory, press [Q.M] while in group B–4 or press [V/M] while in group A–2, then turn the MULTI/ CH control to recall the Satellite Memory channel 9.

CHECKING THE UPLINK FREQUENCY

When you need to monitor the uplink (TX) frequency, press [M/S] while in group A–2. Each time you press [M/S], the uplink (TX) frequency and the downlink (RX) frequency are swapped.

USING XIT/ RIT IN SATELLITE MODE

You can also use the RIT or XIT function while in the Satellite mode. Press [RIT] (R2) or [XIT] while in group A–2 to activate the function. When the RIT or XIT function is ON, the sub-band frequency display shows the current RIT or XIT offset frequency instead of the operating frequency. To clear the RIT or XIT offset frequency, press and hold [RIT] or [XIT].

Note: You cannot activate both the RIT and XIT functions at the same time in the Satellite mode.

CHANGING THE FREQUENCY BAND

Press [M/S] while in group A–3 to select the band you want to change on the main band, then press [UP]/ [DOWN] while in group A–1 to select the band you want to operate. Press [M/S] again to swap the bands.

33