GROUP C KEYS

The available group C keys change, depending on the current operating mode. Detailed explanations of each function are provided on the following pages:

USB/ LSB MODE

Action

[C–1]

[PROC]

 

[MIC]

[T-MON]

[PWR]

Press the key:

Move to C–2

Speech Processor

—

MIC gain adjustment

TX Monitor level

Output power

ON/ OFF

adjustment

adjustment

Press and

 

Speech Processor

 

 

 

 

Move to group A–1

input level

—

—

—

—

hold the key:

 

adjustment

 

 

 

 

 

 

 

 

 

 

Action

[C–2]

[VOX]

[V GAIN]

[V DLY]

 

[RF]

Press the key:

Move to C–3

VOX ON/ OFF

VOX gain

VOX delay

—

RF gain adjustment

adjustment

adjustment

 

 

 

 

 

Press and

Move to group A–1

—

—

—

—

—

hold the key:

 

 

 

 

 

 

Action

[C–3]

[N.R.]

[A.N.]

[B.C.]

[M.B.C.]

[FILTER]

Press the key:

Move to C–1

Noise Reduction 1

Auto Notch

Beat Cancel

Manual Beat Cancel

Configure DSP filter

or 2 ON/ OFF

ON/ OFF

ON/ OFF

ON/ OFF

setting

 

 

Press and

Move to group A–1

Adjust the Noise

Auto Notch level

—

Adjust Manual Beat

—

hold the key:

Reduction parameter

adjustment

Cancel frequency

 

 

 

GROUP C–1

PROC

Press to switch the Speech Processor function ON or OFF. “PROC” appears on the display when it is ON. Press and hold to configure the Speech Processor compression level. While pressing Mic [PTT], speak in your normal tone and level of voice. Adjust the input level using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to accept the new setting.

MIC

Press to enter the Mic Gain adjustment mode. While pressing Mic [PTT], speak in your normal tone and level of voice. Adjust the microphone gain using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to store the setting. While the Speech Processor function is ON, it works as the Speech Processor output level adjustment control.

21