DISPLAY AND KEY FUNCTIONS

#9 #8#7#6#5 #4 #3 #2

#1 #0 @9 @8 @7 @6

q

 

 

!1

w

 

e

!0

 

r !2!3￿ t!4!5y !6!7 !8u !9

@0i @1o @2@3 @4 @5

q“AT” appears when you operate HF ~ 50 MHz band. Press [L1] to activate the automatic antenna tuner. While it is in-line, “AT IN” or “AT R IN” appears (when Menu No. 27 is “ON”). “CALL” appears when you operate 144 MHz ~ 1.2 GHz bands. Press [L1] to recall the CALL channel for the band or press and hold [L1] to store the new CALL channel data.

wWhile “Q.IN” appears, press [L2] to store the current frequency and other data to the Quick Memory.

e“EASY” appears when you operate the normal

VFO/ Memory Recall mode. Press [L3] to enter Easy Viewing mode {page 34}.

rDisplays the current key group and its suffix number. Press [F1] to move to next suffix number or press and hold [F1] to move to next group {page 13}.

t~ o

The available function name appears. Press [F2] ~ [F6] or press and hold the key to activate the function {pages 13 ~ 30}.

!0The assigned function of [R2] appears. Normally, “RIT” appears. Press [R2] to switch RIT ON or OFF. Press and hold the key to clear the RIT offset frequency.

!1The assigned function of [R1] appears. Normally, “PM” appears. Press to enter Programmable Memory function {page 41}.

!2The main transceiver operating frequency display.

!3When the main transceiver receives a signal or the main transceiver’s squelch is open, “BSY” appears. When you transmit on the main transceiver, “TX” appears.

!4The memory name appears when you recall the memory channel. “CALL” appears when you recall the CALL channel. “SCAN–P1” (slowest scan speed) ~ “SCAN–P9” (fastest scan speed) appears while in Scan mode.

!5“S” appears when the main transceiver is in receive mode. “PWR” (output power), “SWR” (SWR ratio), or “ALC” (Automatic Level Control) appears when you select the meter function.

!6The memory channel number appears (3 digits) when you recall the Memory channel. The memory group number “0–” ~ “9–” also appears. When the channel is locked out, “— — —” appears above the memory channel number. “Q01” ~ “Q09” appears when you recall a Quick Memory channel. The Satellite memory channel number “0” ~ “9” appears in the Satellite mode. If no data is stored “s” appears along with the memory channel number.

10