Kenwood RC-2000 GROUP A KEYS

GROUP A KEYS

Group A–5 appears only when you recall Memory Channel 290 ~ 299. Detailed explanations of each function are provided on the following pages:

Action	[A–1]	[MODE]	[FINE]	[1MHz]	[DOWN]	[UP]
Press the key:	Move to A–2	Change the	FINE function	1 MHz Up/ Down	Move down one	Move up one
		operating mode pair	ON/ OFF	control ON/ OFF	amateur radio band	amateur radio band
Press and		Toggle the mode		Change the step	Continuously move	Continuously move
	Move to group B–1	within the selected	—	size for the 1 MHz
hold the key:					down the band	up the band
		pair		control
Action	[A–2]	[A/B]	[SPLIT]	[TF SET]	[A=B]	[XIT]
			SPLIT function	Check and change	Copy the current	XIT function
Press the key:	Move to A–3	Select another VFO		the TX frequency in	VFO data to another
			ON/ OFF			ON/ OFF
				SPLIT operation	VFO
Press and	Move to group B–1	—	—	—	—	Clear the XIT
hold the key:						frequency offset
Action	[A–3]	[MENU]	[STEP]	[NB]	[AGC]	[PF]
Press the key:	Move to A–4	Enter Menu mode	Change the	Noise Blanker	AGC ON/ OFF	Activate PF (Prog.
			frequency step	ON/ OFF		Function)
Press and	Move to group B–1	–	—	Configure the Noise	Configure the AGC	—
hold the key:				Blanker level	time constant
Action	[A–4]	[CLR]	[M>V]	[MG SEL]	[M.IN]	[V/M]
		Exit, abort, or reset	Transfer data from a	Enter Memory	Write data into	VFO or Memory
Press the key:	Move to A–5 or A–1	various functions	Memory channel to	Group Select mode	memory or enter	Recall mode
			a VFO		Memory Scroll mode
Press and	Move to group B–1	—	—	—	—	—
hold the key:
Action	[A–5]	[SET]	[OPEN]		[CLOSE]
		Add the current freq.	Display the start		Display the end
Press the key:	Move to A–1	to the Prog. Scan	frequency of the	—	frequency of the	—
		Partially Slowed	memory channel		memory channel
Press and	Move to group B–1	Clear all the above	—	—	—	—
hold the key:		freq. points

14