T-MON

Press to adjust the monitor level of your transmission signal. Adjust the monitor level using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to store the setting.

PWR

Press to adjust the output power {TS-2000 page 20}. Adjust the output power using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to store the setting.

GROUP C–2

VOX

Press to switch the Voice-Operated Transmission function ON or OFF {TS-2000 page 39}.

V GAIN

Press to adjust the VOX gain {TS-2000 page 39}. While pressing Mic [PTT], adjust the VOX gain using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to store the setting.

V DLY

Press to adjust the VOX delay time. Select your desired delay time using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to change the setting.

RF

Refer to RF in the CW section {page 24}.

GROUP C–3

N.R.

Press to activate Noise Reduction 1, Noise Reduction 2, or to turn the function OFF. When the noise reduction function is ON, “N.R.1” or “N.R.2” appears above the key. When it is ON, press and hold the key to change the noise reduction level. Adjust the noise reduction level using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to store the setting.

A.N.

Press to switch the Auto Notch function ON or OFF. Press and hold the key to change the Auto Notch level. Adjust the Auto Notch tracking time constant using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to store the setting.

B.C.

Press to switch the automatic Beat Cancel function ON or OFF. “B.C.” and “DSP” appear when it is ON.

M.B.C.

Refer to M.B.C. in the CW section {page 24}.

FILTER

Refer to FILTER in the CW section {page 24}.

22