SPEAKER AND MIC CABLE INSTALLATION

Connect the speaker extension cable plug to the EXT.SP1 or EXT.SP2 connector {TS-2000 page 78}. Then connect a plug from the speaker to the jack as shown below. Connect the microphone extension cable between the microphone jack on the front of the transceiver and the microphone connector, as shown below.

Speaker extension cable

Noise filter (small)

Noise filter

(large)

Microphone extention cable

MODULAR PLUG CABLE CONNECTION

Use the supplied modular plug cable to connect the front panel to the main unit. Connect the 4-pin plug to the front panel and 6-pin plug to the main unit.

Note: It is easy to identify between the plugs, as the 6-pin plug is slightly wider than the 4-pin plug.

TS-2000/TS-2000X

TS-B2000

Noise filter (small)

6-pin plug

4-pin plug

4