OVERVIEW
The TS-2000(X)/ TS-B2000 transceiver has many function controls. However, the RC-2000 mobile controller has only 12 keys and 5 controls. In order to access all the available functions of the transceiver from the RC-2000 mobile controller, the functions are divided into 3 groups: A, B, and C. Group A is a primary function group with most of the commonly used keys. Group B is a secondary function group. Group C is a special group whose functions change, depending on the current operating mode.
Within each group, there are several sub-groups, each identified by their suffix numbers. Momentarily press [F1] to cycle through each sub-group within your selected group (A, B, or C). The suffix numbers change to reflect the currently selected sub-group. To change the main group (A, B, or C), press and hold [F1].
As you change the group and sub-group, the available functions for [F2] ~ [F6] change. Press one of [F2] ~ [F6] to activate the function which appears on the display above each key.
To access your desired function, first select the appropriate group by pressing and holding [F1]. Next, cycle within the group to the appropriate sub-group by continuously pressing [F1]. The selected group and corresponding number appears on the display above the [F1] key.
The following diagram illustrates how to access each group and sub-group.
For further information on each function, refer to the TS-2000(X)/ TS-B2000 instruction manual. A Quick look-up table of each operating mode is available, starting on page 47.
DIAGRAM
[F1] | [F1] | [F1] |
(1 s) | (1 s) | (1 s) |
GROUP A | GROUP B | GROUP C |
A–1 | B–1 | C–1 |
[F1] | [F1] | [F1] |
A–2 | B–2 | C–2 |
[F1] | [F1] | [F1] |
A–3 | B–3 | C–3 |
[F1] | [F1] | [F1] |
A–4 | B–4 | (C–4) |
[F1] | [F1] | [F1] |
(A–5) | | |
[F1] | Press [F1] | • A–5 appears only when recalling |
| Memory Channels 290~299. |
| Press [F1] (1 s) |
| • C–4 appears only in FM mode. |
| |
