GROUP C–2

VOX

Refer to VOX in the USB/ LSB section {page 22} .

V GAIN

Refer to V GAIN in the USB/ LSB section {page 22}.

V DLY

Refer to V DLY in the USB/ LSB section {page 22}.

NAR

Press to select FM narrow bandwidth operation. “FMN” appears when you operate FM narrow bandwidth.

RF

Refer to RF in the CW section {page 24}.

GROUP C–3

CTCSS

Press to activate the CTCSS function. Press and hold the key to select your desired CTCSS tone using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to change the setting. Press [SCAN] to start the CTCSS Freq. ID Scan.

TONE

Press to activate the TONE function.

DCS

Press to activate the DCS function. Press and hold the key to select your desired DCS code using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to change the setting. Press [SCAN] to start the DCS code ID Scan.

ALT

Press to activate the Auto Lock Tuning (ALT) function (1.2 GHz band only). When it is ON, “ ” appears.

SHIFT

Press to select the desired repeater shift direction. “–”, “+”, or “=” appears to indicate the shift direction.

GROUP C–4

N.R.

Refer to N.R. in the USB/ LSB section {page 22}.

T.SEL

Press to select your desired TONE frequency using the [c]/ [d] keys or by turning the MULTI/ CH control, then press either [EXIT] or the MULTI/ CH control to change the setting. Press [SCAN] to start the TONE ID Scan.

M.B.C.

Refer to M.B.C. in the CW section {page 24}.

FILTER

Refer to FILTER in the CW section {page 24}.

26