ABOUT THIS MANUAL

BEFORE YOU BEGIN

This manual was created to show you how to access the functions you want to operate, and how to quickly configure the transceiver, through the use of the RC-2000. If you are operating the TS-2000(X)/ TS-B2000 transceiver for the first time, we recommend you read the TS-2000(X)/ TS-B2000 instruction manual before operating the RC-2000. Since this manual does not cover the functions in detail, make sure you have the TS-2000(X)/ TS-B2000 instruction manual handy for reference.

PREPARATION (Pages 2 ~ 6)

When you are getting ready to install the brackets and cables, read this chapter.

QUICK START (Page 7)

If you are operating the RC-2000 for the first time, read this chapter and follow the instructions for a trial run.

KEYS AND CONTROLS (Page 8 ~ 12) CYCLING THE KEY GROUPS (Pages 13 ~ 30)

These chapters describe how to access and configure the various functions available on the RC-2000. Refer to the page that explains your desired key control.

SATELLITE MODE (Pages 31 ~ 33)

This chapter describes how to control the functions while

you are operating in the Satellite mode.

EASY VIEWING MODE (Pages 34 ~ 36)

This chapter describes how to control the functions while you are in the Easy Viewing mode.

PACKET CLUSTER TUNE (Pages 37 ~ 38)

This chapter describes how to control the functions when you activate the Packet Cluster Tune mode.

VISUAL SCAN (Pages 39 ~ 40)

This chapter describes how to control the functions when you activate the Visual Scan function.

PROGRAMMABLE MEMORY (Pages 41 ~ 43)

This chapter describes how to store and recall the Programmable Memory function that is available on the RC-2000.

SKY COMMAND II+ (K-TYPE ONLY) (Pages 44 ~ 46)

This chapter describes how to control the Sky Command II+ functions.

QUICK KEY REFERENCE (Pages 47 ~ 51)

Alphabetical listing of the key functions in each operating mode. A Quick look-up table for referring to the page(s) in this guide as well as the TS-2000(X)/ TS-B2000 instruction manual.

1