
Getting Started
BAG SUPPORT STRAPCheck to make sure the Bag Support Strap (4)is con-
4 nected to the Top Adaptor (5). The Bag Support Strap provides the support required for proper operation of the Disposable Filter Bag.
If it is not connected, thread the strap through the small hole of the Top Adaptor. Then place the hole in the strap over the stud on the Top Adaptor.
Finally, insert the adaptor and new filter bag into the Outer Permanent Bag (1)and close the zipper completely for maximum performance.
NOTE: In order for the Filtration System to perform effectively, use only Kirby® Micron Magic® HEPA Filtration Bags. If the outside bag is torn or damaged, please replace immediately. •
EMPTYING THE MINI
The Mini
To remove, grasp the Mini
1handhold provided and rotate it away from the body of the system as far as it will go, then lift it off.
The top of the bag is released from the handle by pressing the Bag Release Button (16). After removing the Mini
To replace the Mini
2 Bag Assembly by inserting the Bag Latch Tab (2)at the top of the bag into the slot under the Bag Release Button (16).
Finally, line up the raised indicator arrow of the Mini
NOTE: The Mini
The Belt Lifter (20) on your Sentria system is used for two purposes:
1)To engage or disengage the Brush Roll. When the Brush Roll is disengaged, the Sentria system can be used as a straight suc- tion cleaner (page 15), and;
2)To allow removal of the Power Nozzle when converting your Sentria system for use with various attachments and optional accessories.
To avoid damaging the belt, turn the Sentria system OFF before using the Belt Lifter. >
/!\ CAUTION: Do not pick up heavy objects, such as coins, screws, rocks or similar objects. This may damage the fan.
10