Optional Accessories

USING THE CARPET FLUFFER (cont)

Lower the Carpet Fluffer Nozzle one notch at a time

3by pushing the Toe-Touch Control Upper Pedal

(8). The instant the brush contacts the carpet, stop lowering the brush. >

Then engage Tech Drive® power assist by pressing

4 down on the red "D" side of the "N/D" Pedal. You are now ready to fluff the carpet by pushing the cleaner back and forth over the carpet.

NOTE: • Lowering the brush too far on cable yarn type carpets may cause the carpet to fuzz. Do not fluff delicate carpets.

•The belt should not be stretched when stored for an extended period. Make sure the green arrows line up for storage. •

TURBO ACCESSORY SET-UP

The Turbo Accessory System can be used for a wide variety of household jobs. It's a sander, a buffing unit, a scouring unit and a massage unit.

TURBO-SANDING

To set up the Turbo Accessory System as a sander,

1unsnap the Sander Dust Shroud at the rear of the tool and lift off. >

2 Rotate the clamp levers on the side of the Turbo Accessory upwards to open the clamps. >

Be sure no metal objects, such as tacks, nails, etc., are sticking up from /!\ CAUTION: the surface. They can damage the sandpaper and the Turbo Accessory.

They may also cause sparks, which could ignite dust. Replace the disposable bag after extended sanding because the dust is fine and will plug the bag pores.

42