Optional Accessories

USING THE HANDI-BUTLER TOOL IN THEHAND-HELD MODE

The Handi-Butler Tool Hand-Held Mode gives the user maximum flexibility when cleaning and polishing an item.

To use the Handi-Butler tool in the hand-held mode,

1begin with the hose attached to the front of your Sentriasystem. >

2 For ease of use, attach the bit to the Flexible Shaft (B) before assembling the Handi-Butler tool.

Rotate the tip of the Flexible Shaft (B) until the hole in the tip lines up with the hole in the grip section. Insert the long end of the Angled Key (D) into the holes. >

3 Use the enclosed Mini Wrench (E) to loosen the silver rotating tip at the end of the Flexible Shaft (B). >

/!\ WARNING:

/!\ WARNING:

/!\ CAUTION:

Do not bend the Flexible Shaft (B) to a radius less than 2 inches, it will over heat and fail.

Do not remove end ferrule while tool is running.

Safety Glasses (F) should be worn when using the Handi-Butler tool.

49