Optional Accessories

USING THE FLOOR BUFFER (cont)

Press the Toe-Touch Control Upper Pedal (8) to lower

9 the brush one notch at a time. Lower the brush as far as the Toe-Touch Control will allow.

With the Buffer running, move the Sentriasystem over the floor as though you were cleaning a carpet, using slow, steady strokes.

NOTE: The belt should not be stretched when stored for an extended period. Make sure the green arrows line up for storage. •

HARD FLOOR PAD

See page 16 for set-up and use of the Hard Floor Pad. •

USING THE CARPET FLUFFER

Your Kirby® Floor Buffer can also be used as a Carpet

Fluffer to reset the nap on a matted-down carpet.

Before fluffing the carpet, raise the nozzle all the way

1up by pushing the Toe-Touch Control Bottom Pedal (9) all the way down.

Place the cleaner on the carpet to be fluffed. >

Plug in the Power Cord. Disengage the Tech Drive®

2 power assist by pressing on the gray "N" side of the Tech Drive N/D Pedal (11).

Holding onto the handle firmly, start the cleaner by pressing the ON switch. >

41