Optional Accessories

4Select one of the cleaning or polishing tools and insert into the tip of the Flexible Shaft (B). Firmly tighten the tip to secure the tool in place with the Mini Wrench (E) . Remove the Angled Key (D). >

NOTE: The Angled Key (D) must be inserted into the holes in order to attach or remove a polishing or cleaning tool.

Now you are ready to attach the Handi-Butler tool to

5 your Sentriasystem. Firmly twist the Handi-Butler tool (A) on to the end of the hose. >

Screw the silver end of the Flexible Shaft (B) onto

6 the Handi-Butler tool (A) making sure the prong in the center of the Flexible Shaft fits into the center of the Handi-Butler tool. >

To avoid accidental starting, make sure the air inlet

7 openings on the Handi-Butler tool (A) are CLOSED before turning your Sentria system on.

Then, turn your Sentria system on. To start the Handi-Butler tool, rotate the Air Valve of the Handi-Butler tool to expose the two air inlet openings. You are now ready to gently polish and clean. Allow the speed of the tool to do all the work. Avoid putting excessive pressure on the spinning tool. •

/!\ IMPORTANT:

/!\ NOTICE:

To avoid accidental starting, make sure the air inlet openings on the Handi-Butler tool (A) are CLOSED before turning your Sentria system on.

USE GENTLE PRESSURE when using the Handi-Butler tool. Strong pressure could stop the rotation of the tool break the cleaning or polishing tool or result in damage to the item being cleaned or polished.

50