Canister Cleaner & Attachments

THE PORTABLE SPRAYER

The Portable Sprayer is used only in the Blower Mode. It is an excellent tool to apply many different types of water-basedliquids to any type of surface. The spray can be adjusted ranging from very fine to coarse.

PORTABLE SPRAYER SET-UP

Unscrew the jar from the Portable Sprayer and fill 3/4

1full with non-flammable liquid. Before reinstalling the jar, make sure the portable sprayer dip tube is attached to the spray gun body. >

Screw the jar tightly on the Portable Sprayer and attach

2 the Portable Sprayer to the end of the Attachment Hose in the Blower Mode.

Make certain your Sentriasystem is set up as a Blower

Unit. The Attachment Hose should be connected to the Air

Exhaust Port (19). •

USING THE PORTABLE SPRAYER

Holding the Portable Sprayer horizontally, aim it

1toward a sheet of newspaper. Turn the Sentria system ON and squeeze the Portable Sprayer trigger, spraying your non-flammable solution onto the newspaper to check spray pattern.

NOTE: If the Portable Sprayer must be tilted during usage, less solution should be used in the jar. This will help avoid large droplets in the spray. >

 

 

Never use oil or solvent based paint of any kind in the Portable Sprayer. The

 

/!\ WARNING:

 

motor is open to the spray and could ignite flammable and volatile solvents.

 

 

 

 

 

25