Optional Accessories

USING THE ZIPPBRUSH

When attached to the Attachment Hose, the Zippbrush can be used for a wide variety of cleaning surfaces, including upholstery, and carpeted steps. It can be used to clean automotive interiors.

For optimum results, do not press down heavily on the Zippbrush. Allow the brush to rotate at maximum speed by gently moving it side to side on the surface being cleaned.

CLEANING THE ZIPPBRUSH

To clean the Zippbrush, press the button on the front

1of the brush to release the outer brush ring.

When pressing the release button, avoid placing pressure on the outer ring brush. >

Lift the center Brush/Air Turbine out of the tool and

2remove any particles or lint from the brush and turbine. Also remove any particles left in the tool cavity. >

Place the Brush/Air Turbine back in the tool and turn

3it until the tabs drop into the slots. Hook the tab on the rear of the brush ring into the small opening of the tool and snap it back into place. •

 

 

While using the Zippbrush, do not insert fingers into the revolving brush

 

/!\ CAUTION:

 

 

area or push the release button while the brush is in motion. Keep brush

 

 

flat against the surface being cleaned as the brush can throw particles

 

 

outward. Do not use on delicate fabrics.

 

 

 

45