Canister Cleaner & Attachments

BLOWER SET-UP

Your Sentria system can also be used as a blower. To do so, you must first remove the Power Nozzle (25).

NOTE: When using your Sentria system as a blower, you may choose between the Upright Handle (17) or the Portable Handle (15).

Turn the power OFF, place the Tech Drive® power

1assist in Neutral (see page 8 for details), unplug the unit from the wall outlet and press the Toe-Touch Control Bottom Pedal (9) all the way down until nozzle is fully raised. >

Raise the Headlight Hood (21) and flip out the handle

2 on the Belt Lifter (20). Use it to turn the Belt Lifter all the way to the left (counter-clockwise) until the red arrows line up. >

Unlock the Power Nozzle (25) by turning the Accessory

3Lock (22) all the way to the left (counter-clockwise). The Power Nozzle should tip forward when it is released. Lift nozzle away from the Sentria system. >

When using the blower attachments, the Air Intake

4 Guard must be attached to the front of the unit.

Fasten the Air Intake Guard onto the Attaching Bar (24) the same way you would the Attachment Hose. Then lock it on by turning the Accessory Lock (22) all the way to the right (clockwise). >

23