Optional Accessories

MAINTENANCE

Kirby recommends that all tools be serviced by an authorized

Kirby Distributor.

The polishing tips and brushes in the Handi-Butler tool have been designed for many hours of use. Check them regularly for wear and replace when necessary. Only genuine Kirby® Handi-Butler®tool parts should be used.

1Oil the flexible shaft by dripping 3-4 drops of oil along the drive shaft after every ten uses. •

CHANGING THE ACCESSORIES

Your Handi-Butler tool comes with a variety of polishing and cleaning tools that can be easily changed to meet your cleaning needs.

The brushes come pre-assembled. The tools used with the polishing tips and disks will need to be assembled before use.

PADS FOR USE WITH THE SCREW MANDREL

The Conical Felt Tip (L) and the 1/2" Felt Tip (M) can

1easily be screwed onto the Screw Mandrel (J). •

PADS FOR USE WITH THE SMALL SCREW MANDREL

The Small Screw Mandrel (K) is designed for use with

1the 1" Felt Disk (N) or the 1" Cloth Disk (O). To attach a disk, use the handle end of the Mini Wrench (E) to remove the small screw from the end of the mandrel. >

Put the polishing disk between the two small red

2 washers found on the Small Screw Mandrel (K) and place the washers and the disk on the screw. Reinsert

the screw into the Mandrel. Use the Mini Wrench (E) to tighten it securely. •

53