Optional Accessories

USING THE HANDI-BUTLER TOOL IN THE

TABLE-TOP MODE

The Hand-Butler tool table-top mode allows you to hold the item you wish to polish or clean with two hands for better control.

In the Table-Top mode, the cleaner should be securely

1fixed in the Handi-Butler Mounting Cradle (G) to prevent the cleaner from moving on the work surface. The cradle

should be bolted (using the provided holes as shown using 1/4" or M6 bolts, washers and nuts) to a stable surface.

Convert your Sentria™ system to the Portable mode. Make sure that the Tech Drive® pedal is in Neutral. Then, with the power off and the nozzle removed, carefully lift the unit and place onto the cradle. >

2 The rear of the unit should be firmly seated in the depression of the cradle, with the rear wheels raised from the work surface and the front of the unit raised to its highest position. >•

3 Attach the Air Intake Guard (included with your Sentria system) to the front of the unit. >

Attach the Handi-Butler tool (A) to the Air Intake

4 Guard. >

 

 

To reduce the risk of injury to the operator, insure that the Handi-Butler

 

/!\ CAUTION:

 

toll is properly secured before use.

 

 

Some dust created by polishing and cleaning could contain chemicals known to cause cancer, birth defects or other reproductive harm.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

51