Upright & Portable Cleaner

If desired, engage Tech Drive® power assist by

4 pushing down the red "D" side (marked "D" for Drive) of the Tech Drive N/D Pedal (12) located just below the Power Switch (13). >

To turn your Sentria™ system OFF, press the Toe-

5 Touch Control Bottom Pedal (9) all the way down until nozzle is fully raised.

Disengage Tech Drive power assist by stepping on the gray "N" side (marked "N" for Neutral) of the Tech Drive N/D Pedal (11).

Turn the Sentria system OFF by pressing the Power Switch (13) and then unplugging. •

STRAIGHT SUCTION CLEANER

Straight Suction Cleaning allows you to vacuum hard floors, throw rugs and delicate carpets without use of the Brush Roll.

NOTE: When using Straight Suction Cleaning without the Hard Floor Pad, either on carpets or bare floors, lower the nozzle as close as possible to the floor without touching the floor.

With the Sentria system turned OFF, raise the

1Headlight Hood (21). >

Flip out the handle on the Belt Lifter (20). Use it to turn

2the Belt Lifter all the way to the left (counter-clock- wise) until the red arrows line up (see page 10). Return the handle on the Belt Lifter to its closed position.

Then lower the Headlight Hood.

The Brush Roll is now disengaged and your Sentria system will operate as a Straight Suction Cleaner. •

 

 

 

 

 

/!\ NOTICE:

 

Tech Drive pedal must be in neutral when using the cleaner on hard

 

 

 

surface floors.

 

 

 

 

 

 

 

15