
Optional Accessories
FLOOR BUFFER5Place the hooks located on the rear of the nozzle over the Attaching Bar (24) and push the nozzle up against the Sentria™ system.
Turn the Accessory Lock (22) all the way to the right (clockwise) to lock the nozzle in place. >
To engage the drive belt and Buffer Brush, use the
6handle to turn the Belt Lifter all the way to the right (clockwise) until the green arrows line up. Lower the Headlight Hood (21).>
7 DO NOT USE Tech Drive® power assist with the Floor Buffer.
Place Tech Drive power assist in Neutral by stepping on the gray "N" side ("N" for Neutral) of the Tech Drive N/D Pedal (11). >
USING THE FLOOR BUFFER8Because the unit moves forward when the Floor Buffer Brush touches the floor, make sure the Buffer Nozzle is on its highest setting. Press the
Bottom Pedal (9) all the way down to raise the Buffer Nozzle all the way up.
While holding onto the unit's handle, turn the Sentria system ON. >
/!\ CAUTION: To avoid losing control of the Buffer when brush is on the floor surface, hold on to the handle before plugging the power cord into the wall outlet
and before turning the power switch ON. To avoid possible damage to soft tiles or marking of waxed and finished
40