Optional Accessories

FLOOR BUFFER SET-UP

Your Sentria™ system can be used as an effective floor buffer for wood or tile floors.

To use the Floor Buffer, you must first insert the Buffer

Brush into the Floor Buffer Nozzle.

Center the belt of the Buffer Brush in the middle area

1between the tufts of the brush. >

Turn the Buffer Nozzle over and slide the ends of the

2 Brush into the slots at each end of the nozzle. The Buffer Brush will only fit the correct way. >

3Push the belt up against the Brush Roll with your finger. >

While holding the belt in place, use the handle on the

4Belt Lifter to turn it left (counter-clockwise) until the red arrows line up. The Belt Lifter hook will catch the belt and stretch it upward into the nozzle. >

/!\ CAUTION: To avoid loss of control, do not stand unit on end for polishing. The Tech Drive pedal must be in the neutral position during polishing

39