Canister Cleaner & Attachments

BLOWER SET-UP (cont)

To remove the entire Bag Assembly, grasp the Mini

5 Em-Tor®collector (6) in the hand-hold provided and rotate it out and away from the Sentria system as far as it will go. Then lift it off.

Release the Outer Permanent Bag Top from the Bag Support by pressing the Bag Release Button (16) and sliding the bag top down. >

Place the large end of the Attachment Hose over the

6 Air Exhaust Port (19). Line up the Indicator Arrow on the Hose End with the Indicator Arrow on the Air Exhaust Port and twist the Hose Connector to the right (clockwise) to lock it in place.

If the Sentria system will not operate, see page 59. •

USING AS A BLOWER

Your Sentria system may now be used as a blower.

By attaching the Inflator/Deflator Tool to the Attachment Hose, you can inflate toys, air mattresses or any other low-pressure inflatable item up to 1 p.s.i. (pounds per square inch of air pressure). >

To deflate items, connect the Attachment Hose to the front of the unit and connect the Inflator/Deflator Tool to the Attachment Hose. Then connect the Bag Assembly to the Air Exhaust Port.

You may now use your Sentria system to deflate items.

NOTE: You can also use this set-up to clean tight areas such as computer keyboards and audio/video equipment. •

24